Articles Internationaux
Permanent URI for this collection
Browse
Browsing Articles Internationaux by Author "Chikh, Benazouz"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
- ItemA new non-iterative procedure to estimate seismic demands of structures(Techno-Press, 2022) Mechaala, Abdelmounaim; Chikh, BenazouzUsing the nonlinear static procedures has become very common in seismic codes to achieve the nonlinear response of the structure during an earthquake. The capacity spectrum method (CSM) adopted in ATC-40 is considered as one of the most known and useful procedures. For this procedure the seismic demand can be approximated from the maximum deformation of an equivalent linear elastic Single-Degree-of-Freedom system (SDOF) that has an equivalent damping ratio and period by using an iterative procedure. Data from the results of this procedure are plotted in acceleration- displacement response spectrum (ADRS) format. Different improvements have been made in order to have more accurate results compared to the Non Linear Time History Analysis (NL-THA). A new procedure is presented in this paper where the iteration process shall not be required. This will be done by estimation the ductility demand response spectrum (DDRS) and the corresponding effective damping of the bilinear system based on a new parameter of control, called normalized yield strength coefficient (η), while retaining the attraction of graphical implementation of the improved procedure of the FEMA-440. The proposed procedure accuracy should be verified with the NL-THA analysis results as a first implementation. The comparison shows that the new procedure provided a good estimation of the nonlinear response of the structure compared with those obtained when using the NL-THA analysis.
- ItemDynamic response estimation of an equivalent single degree of freedom system using artificial neural network and nonlinear static procedure(MIM Research Group, 2024) Benbokhari, Abdellatif; Chikh, Benazouz; Mébarki, AhmedThis paper introduces an innovative methodology for predicting the maximum dynamic response of structures using capacity curves and artificial neural networks (ANNs). This novel approach offers a quick and accurate procedure for estimating target displacements, obviating the need for intricate supplementary computations. The method generates a comprehensive dataset encompassing the bilinear representation of a single-degree-of-freedom (SDOF) characteristic, with ground motion parameters as inputs and maximum inelastic displacement as the corresponding output. This dataset is used to train an ANN model, with meticulous calibration of hyperparameters to ensure optimal model performance and predictive precision. The findings of this study demonstrate that the ANN model showed operational efficacy in approximating dynamic displacements. It is notably revealed that the size of the dataset significantly influences the ANN’s performance and predictive accuracy. Through comparative analysis with established methodologies such as the displacement coefficient method and the modified coefficient method adopted by the Federal Emergency Management Agency (FEMA), the ANN model emerges as a fast tool for precisely predicting the dynamic response of single-degree-of-freedom systems, particularly those characterized by vibration periods exceeding 0.5 seconds. Consequently, this research culminates in the assertion that the ANN, owing to its inherent simplicity and impressive precision, is an alternative tool for estimating target displacements.
- ItemNumerical investigation of the hysteretic response analysis and damage assessment of RC column(Techno-Press, 2023) Mechaala, Abdelmounaim; Chikh, Benazouz; Bechtoula, Hakim; Ould Ouali, Mohand; Nekmouche, AghilesThe Finite Element (FE) modeling of Reinforced Concrete (RC) under seismic loading has a sensitive impact in terms of getting good contribution compared to experimental results. Several idealized model types for simulating the nonlinear response have been developed based on the plasticity distribution alone the model. The Continuum Models are the most used category of modeling, to understand the seismic behavior of structural elements in terms of their components, cracking patterns, hysteretic response, and failure mechanisms. However, the material modeling, contact and nonlinear analysis strategy are highly complex due to the joint operation of concrete and steel. This paper presents a numerical simulation of a chosen RC column under monotonic and cyclic loading using the FE Abaqus, to assess the hysteretic response and failure mechanisms in the RC columns, where the perfect bonding option is used for the contact between concrete and steel. While results of the numerical study under cyclic loading compared to experimental tests might be unsuccessful due to the lack of bond-slip modeling. The monotonic loading shows a good estimation of the envelope response and deformation components. In addition, this work further demonstrates the advantage and efficiency of the damage distributions since the obtained damage distributions fit the expected results.
- ItemSeismic vulnerability of an existing strategic RC building using non linear static and dynamic analyses(Croatian Association of Civil Engineers, 2020) Mehani, Youcef; Kibboua, Abderrahmane; Chikh, Benazouz; Remki, MustaphaAlgeria is the most seismically active country in the northern part of Africa, and it has so far suffered a number of catastrophic earthquakes. The 2003 Boumerdes earthquake, magnitude 6.8, was the most devastating earthquake that occurred near the capital Algiers, killing and injuring thousands of people. Many existing strategic RC buildings were severely damaged and hence made unfit for use after the earthquake. Seismic vulnerability of an old RC concrete strategic building designed without consideration for any seismic loading is assessed in the paper.