Dynamique des Sols et des Structures (Dyna2S)
Permanent URI for this community
Browse
Browsing Dynamique des Sols et des Structures (Dyna2S) by Author "Hadid, Mohamed"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
- ItemAnalysis of coupled site and soil–structure interaction effects on the seismic response of multistory buildings according to EC-8 and ASCE7-16 Code provisions(Springer International Publishing, 2023) Beneldjouzi, Mohamed; Hadid, Mohamed; Laouami, Nasser; Remki, MustaphaIn strong seismicity areas, the structures experience seismic excitations that are affected by earthquake source effects and their propagating path, local site effects, and soil–structure interaction effects (SSIE). This study explores the impact of SSIE associated with site effects (SE) on the seismic response of multi-story buildings through a frequency domain solution within the EC-8 and ASCE7-16 code provisions. Low-to-mid-rise multistoried buildings are selected via their slenderness ratio to form systems associated with a wide range of soil profiles simulated using the random field theory. Shaking intensity ranging from moderate to strong is considered through an appropriate range of seismic magnitudes and shows that when the superstructure interacts with the nearby subsoil layers, the ground shaking level either amplifies or reduces the structural responses depending on the site category and the structure’s slenderness ratio. Results indicate that, in contrast to most common SSI investigations, seismic magnitude connected with the local geology affects the response of the structure and, in certain situations, makes SSIE unfavorable. The study's findings are presented in such a way that ratios can be utilized to show how SSIE differ from SE in terms of their impact on seismic base shear (BS) and roof displacement.
- ItemFrequency-domain preliminary assessment of coupled site and SSI effects according to the Algerian seismic provisions(Emerald Publishing, 2024) Beneldjouzi, Mohamed; Hadid, Mohamed; Laouami, NasserPurpose - Several studies were made on paired site and soil–structure interaction (SSI) effects, but most of them were site specific. This paper aims to investigate the impact of SSI effects in conjunction with local soil condition effects on the seismic response of typical multistory low- to mid-rise–reinforced concrete (RC) buildings resting on Algerian regulatory design sites through a global explicit transfer function (TF). Design/methodology/approach - A preliminary quantification of SSI effects associated with site effects is carried out through a frequency-domain solution based on the concept of rock-to-soil surface displacement TF performed for each design site category. It results from the combination of the TFs of structure, foundation and soil and reflects how seismic waves are amplified due to changes in the geological contrast between the rock and overlying soil deposits. As well, response modification factors, denoting displacement ratios of the building responses within the flexible and site-structure conditions with respect to the fixed-base one, are carried out. Findings - In the context of Algerian seismic regulation, the study provides a clear vision of how and when site or SSI effects are expected to be influential, as opposed to the fixed-base hypothesis still retained by the current regulation. This helps engineers to be aware of the extent of the expected seismic damage. Research limitations/implications - The research applies to low- to mid-rise RC buildings within the Algerian seismic regulation, but it may also be expanded to other examples that fall under other seismic regulations. Practical implications - The response modification ratio is a quantitative approach to assessing response fluctuations. It draws attention to how the roof level drift varies depending on the condition. These results can be used as numerical parameters in structural seismic design when the structure is comparable because they provide useful information about how the two phenomena interact with the structure. Originality/value - The study goes beyond particular situations dealing with site specific and offers effective indicators and quantitative evaluation of combined site and SSI effects according to the current national seismic provisions, where no indication about site or SSI effects exists.
- ItemInfluence of soil properties on amplification of saturated inhomogeneous poroviscoelastic soil profile(Croatian Association of Civil Engineers, 2020) Ouzandja, Toufiq; Hadid, MohamedThe influence of local geotechnical site conditions on the soil profile amplification is analysed in this paper by assuming that the incoming seismic waves consist of inclined P-SV waves. The inhomogeneous soil profile is idealized as a multi-layered saturated poroviscoelastic medium and characterized by the Biot’s theory with a shear modulus varying continuously in depth according to the Wichtmann’s model. The results are presented in terms of horizontal and vertical soil profile amplification with linear and nonlinear soil behaviour, for different values of incidence angle, pore-water saturation, porosity, permeability, coefficient of uniformity, and non-cohesive fines content.
- ItemLumped parameter model for vertical vibrations of surface circular foundations on nonhomogeneous soil(Emerald Publishing, 2023) Zahafi, Amina; Hadid, Mohamed; Bencharif, RaoufPurpose - A newly developed frequency-independent lumped parameter model (LPM) is the purpose of the present paper. This new model's direct outcome ensures high efficiency and a straightforward calculation of foundations' vertical vibrations. A rigid circular foundation shape resting on a nonhomogeneous half-space subjected to a vertical time-harmonic excitation is considered. Design/methodology/approach - A simple model representing the soil-foundation system consists of a single degree of freedom (SDOF) system incorporating a lumped mass linked to a frequency-independent spring and dashpot. Besides that, an additional fictitious mass is incorporated into the SDOF system. Several numerical methods and mathematical techniques are used to identify each SDOF's parameter: (1) the vertical component of the static and dynamic foundation impedance function is calculated. This dynamic interaction problem is solved by using a formulation combining the boundary element method and the thin layer method, which allows the simulation of any complex nonhomogeneous half-space configuration. After, one determines the static stiffness's expression of the circular foundation resting on a nonhomogeneous half-space. (2) The system's parameters (dashpot coefficient and fictitious mass) are calculated at the resonance frequency; and (3) using a curve fitting technique, the general formulas of the frequency-independent dashpot coefficients and additional fictitious mass are established. Findings - Comparisons with other results from a rigorous formulation were made to verify the developed model's accuracy; these are exceptional cases of the more general problems that can be addressed (problems like shallow or embedded foundations of arbitrary shape, other vibration modes, etc.). Originality/value - In this new LPM, the impedance functions will no longer be needed. The engineer only needs a limited number of input parameters (geometrical and mechanical characteristics of the foundation and the soil). Moreover, a simple calculator is required (i.e. we do not need any sophisticated software).