Dynamique des Sols et des Structures (Dyna2S)
Permanent URI for this community
Browse
Browsing Dynamique des Sols et des Structures (Dyna2S) by Issue Date
Now showing 1 - 11 of 11
Results Per Page
Sort Options
- ItemHybrid BEM-TLM-PML method for the dynamic impedance functions calculation of a rigid strip-footing on a nearly saturated poroelastic soil profile(Elsevier, 2020) Bencharif, R.; Hadid, M.; Mezouar, N.This paper attempts to develop a novel hybrid method to address the dynamic impedance functions of a rigid strip-foundation resting on a non-homogeneous poroelastic soil profile. The rigid footing is perfectly bonded to the soil profile and is subjected to time-harmonic loadings. The soil profile under consideration comprises several horizontal layers with different thicknesses and an underlying half-space or fixed base (layered stratum); these aspects are governed by Biot's theory of poroelastodynamics combined with a simplified approach to consider the saturation effect. The dynamic interaction problem is solved by employing a hybrid formulation combining the Boundary Element Method (BEM), the Thin Layer Method (TLM) and the Perfectly Matched Layer technique (PML), which allows the calculation of Green's functions for the multi-layered poroelastic half-space. Comparisons with the existing results were made to verify the formulation; these are special cases of the more general problems that have been addressed. Select numerical solutions are presented to demonstrate the impact of the boundary conditions at the bottom of the soil profile, geotechnical properties (such as the saturation degree, uniformity coefficient, angle of internal friction, etc.) and non-homogeneity effects on the dynamic impedance functions.
- ItemSeismic vulnerability of an existing strategic RC building using non linear static and dynamic analyses(Croatian Association of Civil Engineers, 2020) Mehani, Youcef; Kibboua, Abderrahmane; Chikh, Benazouz; Remki, MustaphaAlgeria is the most seismically active country in the northern part of Africa, and it has so far suffered a number of catastrophic earthquakes. The 2003 Boumerdes earthquake, magnitude 6.8, was the most devastating earthquake that occurred near the capital Algiers, killing and injuring thousands of people. Many existing strategic RC buildings were severely damaged and hence made unfit for use after the earthquake. Seismic vulnerability of an old RC concrete strategic building designed without consideration for any seismic loading is assessed in the paper.
- ItemInfluence of soil properties on amplification of saturated inhomogeneous poroviscoelastic soil profile(Croatian Association of Civil Engineers, 2020) Ouzandja, Toufiq; Hadid, MohamedThe influence of local geotechnical site conditions on the soil profile amplification is analysed in this paper by assuming that the incoming seismic waves consist of inclined P-SV waves. The inhomogeneous soil profile is idealized as a multi-layered saturated poroviscoelastic medium and characterized by the Biot’s theory with a shear modulus varying continuously in depth according to the Wichtmann’s model. The results are presented in terms of horizontal and vertical soil profile amplification with linear and nonlinear soil behaviour, for different values of incidence angle, pore-water saturation, porosity, permeability, coefficient of uniformity, and non-cohesive fines content.
- ItemTopographic effects on seismic responses of steep sloped superficially weathered rock : the case of 'Rocher Noir' at Boumerdes city in Algeria(Springer Nature, 2021) Messaoudi, Akila; Mezouar, Nourredine; Laouami, Nasser; Hadid, MohammedRocks often showed an alteration in their first meters of depth, by the presence of weathered portion through variable thickness. Concentration of building damage near the edge of hard or dense cliff has been observed during a number of earthquakes. The numerical analysis of topographic effects of rocky steep slopes knowingly neglects the stratigraphic effect. In previous studies, it was evoked the fracturing of the upper parts of the site of ‘Rocher Noir’ in Boumerdes City, and the obtained HVSR curves were flat or presenting a peak over 10 Hz, explained by the fact that the metamorphic outcropping is overlaid by sediments. In this paper, interaction between the effects of stratigraphic and topographic amplification of this weathered rocky site is investigated through 1D and 2D numerical models. The goal of these investigations is to provide a better understanding of the potential hazard that is represented by amplified ground motion due to the coupling effect (1D amplification and topographic amplification) and to quantify the weathering effects on topographic amplification. Seismic responses (amplification functions and response spectra) are calculated at representative points located in the upper surface of the rocky model, assumed either hard or weathered. The obtained results show that the presence of a weathered portion on the surface can modify the ground response in the sense of higher amplification, larger bandwidth (modifying of the mode vibration), multiple response spectra peaks and inducing a considerable vertical acceleration component. Ambient noise measurements were conducted, the HVSR results agree well with those obtained by modelling.
- ItemA new non-iterative procedure to estimate seismic demands of structures(Techno-Press, 2022) Mechaala, Abdelmounaim; Chikh, BenazouzUsing the nonlinear static procedures has become very common in seismic codes to achieve the nonlinear response of the structure during an earthquake. The capacity spectrum method (CSM) adopted in ATC-40 is considered as one of the most known and useful procedures. For this procedure the seismic demand can be approximated from the maximum deformation of an equivalent linear elastic Single-Degree-of-Freedom system (SDOF) that has an equivalent damping ratio and period by using an iterative procedure. Data from the results of this procedure are plotted in acceleration- displacement response spectrum (ADRS) format. Different improvements have been made in order to have more accurate results compared to the Non Linear Time History Analysis (NL-THA). A new procedure is presented in this paper where the iteration process shall not be required. This will be done by estimation the ductility demand response spectrum (DDRS) and the corresponding effective damping of the bilinear system based on a new parameter of control, called normalized yield strength coefficient (η), while retaining the attraction of graphical implementation of the improved procedure of the FEMA-440. The proposed procedure accuracy should be verified with the NL-THA analysis results as a first implementation. The comparison shows that the new procedure provided a good estimation of the nonlinear response of the structure compared with those obtained when using the NL-THA analysis.
- ItemLumped parameter model for vertical vibrations of surface circular foundations on nonhomogeneous soil(Emerald Publishing, 2023) Zahafi, Amina; Hadid, Mohamed; Bencharif, RaoufPurpose - A newly developed frequency-independent lumped parameter model (LPM) is the purpose of the present paper. This new model's direct outcome ensures high efficiency and a straightforward calculation of foundations' vertical vibrations. A rigid circular foundation shape resting on a nonhomogeneous half-space subjected to a vertical time-harmonic excitation is considered. Design/methodology/approach - A simple model representing the soil-foundation system consists of a single degree of freedom (SDOF) system incorporating a lumped mass linked to a frequency-independent spring and dashpot. Besides that, an additional fictitious mass is incorporated into the SDOF system. Several numerical methods and mathematical techniques are used to identify each SDOF's parameter: (1) the vertical component of the static and dynamic foundation impedance function is calculated. This dynamic interaction problem is solved by using a formulation combining the boundary element method and the thin layer method, which allows the simulation of any complex nonhomogeneous half-space configuration. After, one determines the static stiffness's expression of the circular foundation resting on a nonhomogeneous half-space. (2) The system's parameters (dashpot coefficient and fictitious mass) are calculated at the resonance frequency; and (3) using a curve fitting technique, the general formulas of the frequency-independent dashpot coefficients and additional fictitious mass are established. Findings - Comparisons with other results from a rigorous formulation were made to verify the developed model's accuracy; these are exceptional cases of the more general problems that can be addressed (problems like shallow or embedded foundations of arbitrary shape, other vibration modes, etc.). Originality/value - In this new LPM, the impedance functions will no longer be needed. The engineer only needs a limited number of input parameters (geometrical and mechanical characteristics of the foundation and the soil). Moreover, a simple calculator is required (i.e. we do not need any sophisticated software).
- ItemAnalysis of coupled site and soil–structure interaction effects on the seismic response of multistory buildings according to EC-8 and ASCE7-16 Code provisions(Springer International Publishing, 2023) Beneldjouzi, Mohamed; Hadid, Mohamed; Laouami, Nasser; Remki, MustaphaIn strong seismicity areas, the structures experience seismic excitations that are affected by earthquake source effects and their propagating path, local site effects, and soil–structure interaction effects (SSIE). This study explores the impact of SSIE associated with site effects (SE) on the seismic response of multi-story buildings through a frequency domain solution within the EC-8 and ASCE7-16 code provisions. Low-to-mid-rise multistoried buildings are selected via their slenderness ratio to form systems associated with a wide range of soil profiles simulated using the random field theory. Shaking intensity ranging from moderate to strong is considered through an appropriate range of seismic magnitudes and shows that when the superstructure interacts with the nearby subsoil layers, the ground shaking level either amplifies or reduces the structural responses depending on the site category and the structure’s slenderness ratio. Results indicate that, in contrast to most common SSI investigations, seismic magnitude connected with the local geology affects the response of the structure and, in certain situations, makes SSIE unfavorable. The study's findings are presented in such a way that ratios can be utilized to show how SSIE differ from SE in terms of their impact on seismic base shear (BS) and roof displacement.
- ItemNumerical investigation of the hysteretic response analysis and damage assessment of RC column(Techno-Press, 2023) Mechaala, Abdelmounaim; Chikh, Benazouz; Bechtoula, Hakim; Ould Ouali, Mohand; Nekmouche, AghilesThe Finite Element (FE) modeling of Reinforced Concrete (RC) under seismic loading has a sensitive impact in terms of getting good contribution compared to experimental results. Several idealized model types for simulating the nonlinear response have been developed based on the plasticity distribution alone the model. The Continuum Models are the most used category of modeling, to understand the seismic behavior of structural elements in terms of their components, cracking patterns, hysteretic response, and failure mechanisms. However, the material modeling, contact and nonlinear analysis strategy are highly complex due to the joint operation of concrete and steel. This paper presents a numerical simulation of a chosen RC column under monotonic and cyclic loading using the FE Abaqus, to assess the hysteretic response and failure mechanisms in the RC columns, where the perfect bonding option is used for the contact between concrete and steel. While results of the numerical study under cyclic loading compared to experimental tests might be unsuccessful due to the lack of bond-slip modeling. The monotonic loading shows a good estimation of the envelope response and deformation components. In addition, this work further demonstrates the advantage and efficiency of the damage distributions since the obtained damage distributions fit the expected results.
- ItemDynamic response estimation of an equivalent single degree of freedom system using artificial neural network and nonlinear static procedure(MIM Research Group, 2024) Benbokhari, Abdellatif; Chikh, Benazouz; Mébarki, AhmedThis paper introduces an innovative methodology for predicting the maximum dynamic response of structures using capacity curves and artificial neural networks (ANNs). This novel approach offers a quick and accurate procedure for estimating target displacements, obviating the need for intricate supplementary computations. The method generates a comprehensive dataset encompassing the bilinear representation of a single-degree-of-freedom (SDOF) characteristic, with ground motion parameters as inputs and maximum inelastic displacement as the corresponding output. This dataset is used to train an ANN model, with meticulous calibration of hyperparameters to ensure optimal model performance and predictive precision. The findings of this study demonstrate that the ANN model showed operational efficacy in approximating dynamic displacements. It is notably revealed that the size of the dataset significantly influences the ANN’s performance and predictive accuracy. Through comparative analysis with established methodologies such as the displacement coefficient method and the modified coefficient method adopted by the Federal Emergency Management Agency (FEMA), the ANN model emerges as a fast tool for precisely predicting the dynamic response of single-degree-of-freedom systems, particularly those characterized by vibration periods exceeding 0.5 seconds. Consequently, this research culminates in the assertion that the ANN, owing to its inherent simplicity and impressive precision, is an alternative tool for estimating target displacements.
- ItemFrequency-domain preliminary assessment of coupled site and SSI effects according to the Algerian seismic provisions(Emerald Publishing, 2024) Beneldjouzi, Mohamed; Hadid, Mohamed; Laouami, NasserPurpose - Several studies were made on paired site and soil–structure interaction (SSI) effects, but most of them were site specific. This paper aims to investigate the impact of SSI effects in conjunction with local soil condition effects on the seismic response of typical multistory low- to mid-rise–reinforced concrete (RC) buildings resting on Algerian regulatory design sites through a global explicit transfer function (TF). Design/methodology/approach - A preliminary quantification of SSI effects associated with site effects is carried out through a frequency-domain solution based on the concept of rock-to-soil surface displacement TF performed for each design site category. It results from the combination of the TFs of structure, foundation and soil and reflects how seismic waves are amplified due to changes in the geological contrast between the rock and overlying soil deposits. As well, response modification factors, denoting displacement ratios of the building responses within the flexible and site-structure conditions with respect to the fixed-base one, are carried out. Findings - In the context of Algerian seismic regulation, the study provides a clear vision of how and when site or SSI effects are expected to be influential, as opposed to the fixed-base hypothesis still retained by the current regulation. This helps engineers to be aware of the extent of the expected seismic damage. Research limitations/implications - The research applies to low- to mid-rise RC buildings within the Algerian seismic regulation, but it may also be expanded to other examples that fall under other seismic regulations. Practical implications - The response modification ratio is a quantitative approach to assessing response fluctuations. It draws attention to how the roof level drift varies depending on the condition. These results can be used as numerical parameters in structural seismic design when the structure is comparable because they provide useful information about how the two phenomena interact with the structure. Originality/value - The study goes beyond particular situations dealing with site specific and offers effective indicators and quantitative evaluation of combined site and SSI effects according to the current national seismic provisions, where no indication about site or SSI effects exists.
- ItemCorrosion rate-based adjustment of plastic hinge parameters of corroded RC elements(UCTEA Turkish Chamber of Civil Engineering, 2024) Benredouane, Mustapha; Bourahla, Nouredine; Ghodbane, Anouar; Khalfaoui, HalaIn line with the trend towards predictive seismic codes adopting the performance-based design method, this paper presents an integrated protocol to determine the degraded hysteresis parameters of corroded RC hinges based on relationships developed for this purpose together with a calibration procedure using the random-mutation hill-climbing algorithm. The adjustment procedure is integrated into the material library of the OpenSees software and used to perform nonlinear dynamic analyses to investigate the seismic performance of a typical bridge with affected piers at different corrosion levels. In practice the proposed procedure permits to assess the seismic performance of existing or new structures for a given corrosion rate distribution.